Daisy

Fundamentals of Vibration and Shock Test Training

Date
Tue, Apr 13, 2027
8:00 AM to 4:00 PM
2 upcoming dates through Apr 15, 2027

From publicly posted calendar Checked 10 hours ago

About this event

Advertisement
From ATI Courses

This three-day Training in Fundamentals of Random Vibration and Shock Testing covers all the information required to plan, perform, and interpret the results of all types of dynamic testing. Some of the additional areas covered are fixture design, field data measurement and interpretation, evolution of test standards and HALT/HASS processes. This class is applicable to ANY vibration and shock testing done to environmental test standards including MIL-STD-810, DO-160, IEC specifications, and all other documents which provide test methodology for environmental testing. The test methods explained and taught in this class apply to testing of ANY equipment subjected to dynamic environments whether it is intended for military/aerospace, commercial, or consumer use. We overview Sine and Random Vibration, also classical waveform shock testing, drop testing and Shock Response Spectrum Testing. We include instrumentation, vibration test, equipment, control systems and fixture design and evaluation. In addition to numerous photographs and videos the class will visit an operational vibration laboratory where they will see vibration test equipment in use. The lab visit will include a demonstration of the vibration test equipment and test techniques discussed in class. An instrumented resonant structure is excited first with slowly sweeping constant acceleration sine vibration. As the frequency increases the observers will directly see the decrease in displacement. The sine vibration demonstration will be followed by an all-frequencies-simultaneous random vibration. Responses will be are compared. Classroom discussion is supported by projected visuals and video clips. Commencing with a review of basic vibrations, we will explore vibration measurements and analysis. We will compare sinusoidal vs. random vibration testing systems, specifications, standards and procedures. We will emphasize vibration and shock test fixture design, fabrication, experimental evaluation, and usage. We will study shock measurement, shock response spectrum (SRS) and shock testing. The course is completely interactive. Students will have the opportunity to ask questions and request clarification throughout the class time. The course emphasizes topics you will use immediately. Suppliers to the military services protectively install commercial-off-the-shelf (COTS) equipment in our flight and land vehicles and in shipboard locations where vibration and shock can be severe. We laboratory test the protected equipment (1) to assure maximum equipment survival and possible combat, also (2) to meet commercial test standards, IEC documents, military standards such as STANAG or MIL-STD-810H, DO-160, etc. Few if any engineering schools teach about such protection or such testing. Hence this specialized course. Steve Brenner has been working in the field of environmental simulation and reliability testing for over 30 years. Beginning in the late sixties with reliability and design verification testing on the Lunar Module, the Space Shuttle in the eighties, to semiconductor manufacturing equipment in the nineties, Mr. Brenner has always been involved with the latest techniques for verifying equipment integrity through testing. Mr. Brenner began his career as an Environmental test engineer with Grumman Aerospace Corporation in New York, worked as design verification and reliability engineer for the Air Force, an Environmental Test Engineer for Lockheed Missiles and Space company, and spent 18 years with Kaiser Electronics in San Jose, where he managed the Environmental Test Lab and was involved with the design of hardware intended for severe environments. Mr. Brenner has been working as a consultant in the reliability testing field since 1996. Anyone with the following needs or interests: I need practical knowledge about mechanical vibration and mechanical shock test, measurement, analysis, designing for dynamics also calibration and/or control because: If you thought, “aha – that’s what I’m supposed to do” to any of the job descriptions listed above, then this course is intended for you. It will help you move up your own “learning curve.” A smaller group, for whom the instructor also intends this course: supervisors of any of the above listed activities. Perhaps you were thrust into this responsibility without adequate training. Maybe your predecessor had no opportunity to alert you to potential difficulties. You certainly need to know what your people are talking about. Possibly you had no formal training for your present responsibilities. You need to explain your department’s activities to your superiors in the technically correct language. Perhaps you need to decide between “in house” and “outside” testing. After this short course, you will be able to When you visit a lab or review a test program, you will have a good understanding of the requirements and execution of dynamics tests and will be able to ask meaningful questions and understand lab

Keep exploring

More around Annapolis

This weekend in Annapolis
59 connected calendars
View full calendar
Around Annapolis, your ad shows up everywhere. See how it works →
Sat
Nov
21
PARKING: Navy Midshipmen vs. Memphis Tigers
GrabTicketsNow Annapolis, MD
Sports & Fitness
Sat
Nov
21
Saturday Music by Danah Denise
Great Frogs Annapolis, MD
11:30 AM
Social & Nightlife
See full Annapolis calendar 29 events this weekend across 59 calendars
Advertisement
Upcoming at ATI Courses
View all at ATI Courses
Wed
Nov
18
Classes & Learning
Wed
Dec
9
Ground System Design and Operations
ATI Courses Teaneck, NJ
8:30 AM
Classes & Learning
Wed
Dec
9
Nondestructive Evaluation
ATI Courses Teaneck, NJ
8:30 AM
Classes & Learning

Something wrong or missing? Suggest an update